My Golf Putters Megablog

All The Golf Putting Aids Updates

Our Featured Golf Writer


Get this best selling golf eBook and Mp3 audio file to improve your skill level

Which Golf Clubs Are For You?

By: Lee MacRae

Are you looking to buy new golf clubs? Finding it difficult to determine what will work the best for you? Newcomers especially can become bewildered by the large variety of golf clubs you see when you are looking to buy.

Read along as we discuss the types available and what they each can do for your game of golf.

To begin with, it can be stated that "off the shelf" golf clubs will work for nearly everybody standing between 5 feet and six feet tall. The principle applies to both sexes. Everyone else will want to consider having clubs made to fit.

Cast or Forged Golf Club?

Standard cast iron golf clubs are the normal way to go.

Why, you ask? Because most standard cast iron golf clubs have a larger "sweet spot". That refers to the area right in the middle of the club face. The larger "sweet spot" you have, the less likely it is that you will hit a bad shot You can still be a little "off center" and the ball is still struck well because you have a larger margin of error. This makes cast iron clubs ideal for anyone who wants a more consistant shot., especially beginners. Until their swing plane is more developed, they will have an easier time striking the ball on a consistant basis with the cast iron club. That is why clubs like "Big Bertha" came on the market. The large oversized head obviously gives a much larger sweet spot than a normal driver. Average golfers get longer and straighter drives on a more consistant basis.

Forged iron clubs are generally the opposite. Harder to hit with because of a smaller sweet spot on the club face.

So why would people buy a forged iron golf club?

Well, because they are made of a softer steel, they offer a better "feel" on each and every shot. The more seasoned player, especially the pros on the circuit, don't need that larger sweet spot. They have a more consistant swing plane and strike the ball with far more accuracy. They use the "feel" of the the forged iron clubs to influence the flight of the ball in a way that a beginner or average player can't.

The shaft of the club is your next thing to look at. Specifically the material it will be made from. Basically, you have steel or composite shafts

The important touchstone here is golf club speed. An ordinary golf player will have a club velocity of 80-94 mph. Slower speeds normally means looking at a shaft made from composite material. The problem with lower speed is you get less distance on your shots. You need to generate more speed [and more power] or find some way to compensate until you can. And that is where the composite golf club shaft enters the picture. It gives you a lot more distance than you would get with your normal swing and a steel shaft.

On the other hand, if you already have good distance on your shots due to good swing speed, you can add some touch and feel to your game very similar to that obtained by using the forged iron clubs. You get the best of both worlds.

You can find out your own swing speed by looking for a golf store that has a velocity speed gun or a radar gun package. It won't cost you much and you will know very quickly which type of shaft is best for you. You can even find some battery operated doppler radar devices on the market that you can set up and use to determine your club velocity by yourself.

With merely these few starting tips, it is normally best if you rent a few different sets of clubs as you play and take note of how each club helps or hampers your game. You are seeking to ascertain your individual strong points or weaknesses. Try out the various types and varieties of golf clubs available at your local golf course or in a nearby town and see what you can learn. You will soon determine the best approach to improving your personal score.

If you implement these tips and work on them, you will be certain to develop a better drive within a short period of time. Just keep on practicing and working on your improvement. It's only a matter of time before your scores begin to drop.

Lower your scores with a good golf putting aid today!

More Thoughts On Golf

Many swing faults occur from an improper setup. This can cause unnecessary adjustments during the swing. Taking care to position the ball, feet, hips and shoulders properly ensures building a good swing foundation. Testing has shown golfers with open stances show no more tendency to slice than golfers with closed stances. The open stance may give the golfers a little more opportunity to slice, because it allows a little more freedom in the downswing and follow-though. The square stance is used by most successful golfers. Beginners should start with a square stance. As you advance, you can experiment with the advantages of other stances. Avoid extreme stances. Experiment to find the stance that works best for you. Take care to set up consistently on all normal shots.
...Golf Help

Putting Tip
Wanna be a good putter? Here are some basic fundamentals you should be practicing.
--Get a putter with a very distinct line marked on it to indicate the target line and practice with a chalk line. You can get a chalk line at any hardware store for 5 or 6 bucks, and it's as valuable a training aid as there is anywhere. Find a putt on the practice green that is straight. Snap a chalk line down from about 5 or 6 feet to the middle of the cup. Make sure that the entire length of the line on your putter is exactly on the chalk line. Start making putts. This will train your eyes to "see square" precisely.
--Keep your the pressure in your hands soft and constant throughout the stroke. Sensitivity is obviously a huge part of putting. If your hands are tight on the grip you are diminishing your sensitivity - period. Also, if your grip pressure changes during the stroke, it's probably not "a stroke" but more likely a jab, flinch, spasm, push, hit ... well, you get the point -- good luck with that kind of technique.
--There is no independent action in the hands. Nothing could be more logical: If you do indeed have the putter face aligned precisely, as in the first point above, the last thing you'd want to do is to change the position of the face. Therefore, your hands should not be moving independently of your arms and shoulders. To see if your hands are moving, as a drill try watching your hands very carefully (instead of the ball) a few times. You'll see what your hands are doing quite easily.
There are many more (seemingly endless) details about putting, of course, but if you turn these fundamental concepts into habits it will take you a long way toward being a consistently good putter
...PGA professional golf

Golf-Specific Sunglasses
Golfers are at a high risk for macular degeneration and other unpleasant eye diseases.
...Golf Tips magazine

Golf Related News

The Power of Momentum

Mon, 02 Apr 2007 00:00:00 GMT
Adam Scott Captures Shell Houston Open Trusting New Pro V1 Golf Ball, 907D2 Driver

Masters preview: Dougherty flies west with the goose, primed to fulfil his American dream

Sun, 06 Apr 2008 00:00:01 +0100
<p>Here is how it goes for the Masters first-timer. Arrive on Sunday, spend four days of practice walking around in a trance, whispering things like: "This is where Tiger holed his chip from, right here" to your caddy. On Thursday, tee it up in the first round. Make a few birdies, get all excited. Make a few double bogeys, the odd treble, the even odder quintuple, get all downhearted. On Friday evening, reluctantly hand in your player's pass and desperately look over your shoulder as security ushers you through the gates. </p>


golf club
discount golf | discount golf equipment

posted by The Old Putter @ 10:16 AM